Owamat Oil/Water Separators

Take a look around your compressor station.

A complete compressor station comprises, aside from the compressor, the air receiver and refrigerated dryer, a fully automatic condensate separator and… the condensate processing system.

Why you, too, need a processing system!

Frequently, condensate consists of 99% of water and only 1% oil. Therefore, processing the oil emulsive condensate on site is always more economical than cost intensive disposal by specialist companies. An important point is, that your system complies with the applicable laws and regulations. The solution: ÖWAMAT®.

For our environment, only the best is good enough.

ÖWAMAT® is an oil-water separation system for dispersed condensates, proven for many years and continually further developed. Since it fulfills the applicable lawful regulations, safe processing is guaranteed and discharge of the processed water into the sewage system is possible without the problems.

The ÖWAMAT® is available in many sizes, ready-to-connect, and is designed to be space saving and user-friendly. In the case of utilization in frost-hazard areas, a separate heating unit assures problem-free processing.

ÖWAMAT^® 1 - 8
The predecessor-generation

+1: Simple installation: no electrical power required +2: Reduces your disposal costs +3: High operational reliability +4: Low maintainance +5: Safe and environment friendly +6: Payback possible within a few months

ÖWAMAT^® 10 - 16
The NEW-generation, Higher Efficiency, Longer Service Life

+1: Up to 90% greater efficiency +2: Simple handling thanks to cartridge technology +3: Longer service life of filter units +4: Type approval including or excluding the separation of free tramp oils +5: Easy retrofitting of a heating system at any time

Experience guarantees the lead - The NEW generation

ÖWAMAT^® 10-16 devices made by BEKO are optimally adjusted to the operating requirements. Having been consistently upgraded and improved over more than two decades, in particular the generation now available has become the standard of this industrial sector with devices which have often been copied but never equalled.

ÖWAMAT^® 10-16 devices are known for superior cost-effectiveness and function:

• Plant-specific sizes

• No energy costs

• National technical approval for all sizes

• No permit according to the law on water required

• Low maintenance. Control once a week only

• Payback within a few months

How it works

Innovative, efficient, reliable The operating principle: Your guarantee for cost-effective condensate treatment The oil-contaminated condensate flows under pressure into the newly designed pressure relief chamber.  1  Here, the pressure is released without creating turbulence in the downstream  2  separation tank. Any entrained coarse dirt particles are held back in a  3  removable trap. In the separation tank, the oil settles on the surface as a result of gravity separation. It then flows into the overflow-proof oil collector  4 . The precleaned condensate flows into the filtration stage.
The prefilter  5 , which is characterized by its ideal flow pattern from the inside to the outside, binds the remaining oil droplets. It also deals with any residual floating oil in the filter chamber. The remaining oil particles are safely and reliably retained in the main filter cartridge  6 . The final result is purified water suitable for discharge directly into the sewer system. Thanks to the cartridge technology, filter replacement is both quick and clean.

Download a copy of our sales brochures for complete specifications and models available.

• Owamat Sales Brochures & Literature